Vincent

Technically reviewed by Vincent, Founder at HEXVARO

Last reviewed

Quick answer

Quick answer

API 20E applies when an API equipment standard or the purchase order calls for it. It defines three bolting specification levels, BSL-1, BSL-2 and BSL-3, with stricter technical, quality and qualification requirements at each step. If your order only asks for ASTM A193 B7 / A194 2H, API 20E is not required; if it names a BSL, the bolting must come from a manufacturer qualified for that level.

LevelWhere buyers meet it
BSL-1General oil and gas equipment bolting
BSL-2Wellhead, valve and pressure equipment where the equipment standard requires it
BSL-3Critical bolting whose failure would release wellbore fluids to the environment

What API 20E covers

The specification applies when referenced by an API equipment standard or when the purchaser specifies it. It covers machined studs, machined bolts, screws and nuts, cold-formed bolting (BSL-1 only) and hot-formed bolts, screws and nuts, with qualification by bolting type. A manufacturer qualified at a higher BSL is also qualified for the lower levels.

The three bolting specification levels

LevelWhat changesWhere buyers meet it
BSL-1Qualification, production and documentation controls on top of the ASTM material standardGeneral oil and gas equipment bolting
BSL-2Tighter process controls, e.g. stress relief after thread rolling and double tempering for some gradesWellhead, valve and pressure equipment where the equipment standard requires it
BSL-3Strictest controls, including physical audits of steel mills and heat-treatment monitoringCritical bolting whose failure would release wellbore fluids to the environment

Grades named in API 20E

  • Studs and bolts: ASTM A193 B7 and B7M, A320 L7, L7M and L43, A540 B22 and B23, among others.
  • Nuts: ASTM A194 2H, 2HM, 7 and 7M.
  • Corrosion-resistant alloys are covered separately by API Spec 20F.

API monogram and how to check a supplier

Manufacturers can be licensed by API to apply the API monogram to bolting made to 20E, for the bolting types and BSLs they are qualified for. When your order requires API 20E, ask for the manufacturer's licence number and scope, and check that the BSL and bolting type on the licence match your order.

What HEXVARO supplies

HEXVARO supplies ASTM A193 B7 stud bolts with A194 2H nuts, B7 threaded rod and tap-end studs to the ASTM standards, plain, hot-dip galvanized or PTFE coated, with a mill test certificate. We do not offer API-monogrammed bolting. If your order calls for API 20E, state the BSL in the RFQ and we will tell you before quoting whether a qualified source is available; we will not quote API 20E bolting we cannot document.

What to put in an oil and gas bolting RFQ

  • Stud and nut grade, e.g. A193 B7 / A194 2H, or B7M / 2HM for hardness-limited service.
  • Whether API 20E applies, and which BSL.
  • Diameter, thread series, length and nuts per stud.
  • Coating, e.g. PTFE with color, or hot-dip galvanized.
  • Required documents, e.g. EN 10204 3.1 certificate and inspection items.

Frequently asked questions

What is API 20E?

API Specification 20E sets requirements for the qualification, production and documentation of alloy and carbon steel bolting used in the petroleum and natural gas industries. It applies when an API equipment standard or the purchaser calls for it.

What is the difference between BSL-1, BSL-2 and BSL-3?

They are three bolting specification levels with increasing technical, quality and qualification requirements. BSL-3 is for critical bolting whose failure would release wellbore fluids to the environment.

Is every A193 B7 stud an API 20E stud?

No. A193 B7 is a material standard. API 20E adds qualification, production and documentation controls, and applies only when the order or equipment standard requires it.

Does API 20E cover stainless steel bolting?

No. API 20E covers alloy and carbon steel bolting. Corrosion-resistant alloy bolting is covered by API Spec 20F.

Does HEXVARO supply API 20E bolting?

We supply ASTM A193 B7 / A194 2H bolting with mill certificates, but we do not offer API-monogrammed bolting. If your order names a BSL, we confirm before quoting whether a qualified source is available.

Products to this standard

Sources for technical review