ASTM / ASME
Widely used for construction and structural steel: A307, A325 / F3125, F1554, A193 B7, and inch sizes to ASME B18.2.1.
Fastener supply · Philippines
Bolts and fasteners shipped to
Manila, Cebu and Davao.
HEXVARO supplies Philippine importers, hardware distributors, steel-building and roofing contractors with ASTM, DIN, ISO and JIS fasteners made in Hebei and Anhui.
Ports & transit
Shipping from China to Philippines.
Typical sea transit after production. Stock items are ready in 10–15 days, made-to-order in 25–30 days. Actual transit varies by carrier and route.
| Destination | Region | Typical transit |
|---|---|---|
| Manila (MICT / South Harbor) | Luzon · Metro Manila | About 5–10 days by sea from Shenzhen, Ningbo or Shanghai |
| Cebu | Visayas | About 7–12 days by sea |
| Davao | Mindanao | About 8–14 days by sea |
What buyers order
Common fastener demand in Philippines.
Roofing & steel buildings
Hex washer head self-drilling roofing screws with EPDM washers, tek screws and light steel framing screws.
Construction & infrastructure
Anchor bolts, A325 structural bolts, wedge anchors and HDG nuts and washers.
Hardware distribution
Mixed-size containers of hex bolts, nuts, washers and threaded rod in metric and inch sizes.
Power & industrial plants
A193 B7 stud bolts with A194 2H nuts and high-strength bolts for maintenance.
Standards
Quoted to the standard you specify.
DIN / ISO
Common for metric hardware distribution: DIN 933 / 931, DIN 934, DIN 125, DIN 7504.
JIS / PNS
JIS references for machinery supply chains; Philippine National Standards (PNS) where a regulation or project requires them.
Import documents
Paperwork for customs and approvals.
Import rules change and depend on the HS code, so confirm the current requirement with your customs broker before ordering.
- The DTI Bureau of Philippine Standards (BPS) runs mandatory certification (PS mark or Import Commodity Clearance) for a list of products that includes some building and construction materials. Whether your fasteners are covered depends on the HS code (usually 7318) and the current list — confirm with your broker or BPS.
- Goods made in China can qualify for preferential duty under the ASEAN–China FTA with a Form E certificate of origin, which we arrange for qualifying shipments.
- We provide the commercial invoice, packing list, Form E, mill test certificates and test reports for clearance and project submittals.
Trade terms
Terms for Philippines buyers.
T/T and L/C at sight are accepted; PayPal for samples. Common Incoterms are FOB China port and CIF Manila or Cebu. LCL is available for smaller mixed orders.
- Reply: within 2 working hours
- MOQ: 500 pcs per specification
- Lead time: 10–15 days stock items
- Payment: T/T · L/C · PayPal
- Shipping ports: Tianjin · Ningbo · Shanghai · Shenzhen
- Incoterms: EXW · FOB · CFR · CIF · DAP
- Experience: Founder with 10+ years in the fastener industry
FAQ
Buying fasteners for Philippines.
How long does shipping from China to Manila take?
Sea freight to Manila typically takes about 5–10 days, plus production time (10–15 days for stock items, 25–30 days for made-to-order).
Do fasteners need an ICC sticker in the Philippines?
Only products on the BPS mandatory list need a PS mark or ICC. Check your HS code against the current list with your broker; we provide the test reports needed if it applies.
Do you supply inch-size bolts?
Yes. ASME B18.2.1 inch hex bolts, A307 and A325 bolts, and UNC threaded rod can be quoted alongside metric sizes.
Can you provide Form E?
Yes. We arrange Form E for qualifying goods so your importer can claim ACFTA preferential duty.
Useful charts
Check sizes before you order.
DIN 933 & DIN 931 Hex Bolt Dimensions & Weight Chart (ISO 4017 / ISO 4014)
DIN 933/DIN 931 bolt dimensions M5–M48: pitch, width across flats, head height, thread length and weight per 1000 pcs; ISO 4017/4014 differences. HEXVARO.
DIN 934 & ISO 4032 Hex Nut Dimensions & Weight Chart
DIN 934 and ISO 4032 hex nut dimensions M3–M64: pitch, width across flats, height and weight per 1000 pcs, ISO 4033 high nuts and bolt-class fit.
DIN 912 / ISO 4762 Socket Head Cap Screw Dimensions Chart
DIN 912 / ISO 4762 socket head cap screw chart M3–M36: head diameter, head height, hex key size, socket depth and thread length, plus grades and RFQ checks.
DIN 976 Threaded Rod Sizes, Weight & Load Chart
DIN 976-1 (DIN 975) threaded rod chart: coarse and fine pitch, stress area, weight per metre and minimum tensile load in class 4.8, 8.8 and 10.9 from M6 to M48.
Start with the specification
Send a clearer RFQ.
Build a more reliable supply plan.
Send the standard or drawing, material, grade, size, finish and quantity. We reply within 2 working hours with a quotation or the questions we need answered to quote.
Request a quote