Plain / black oxide
Lowest cost and shortest lead time. Suits indoor or painted assemblies and stock replacement.
Industry · Oil, gas & petrochemical
HEXVARO supplies ASTM A193 B7 stud bolts with A194 2H heavy hex nuts, B7 threaded rod and tap-end studs to distributors, EPC contractors and plant maintenance buyers. Made in Hebei and Anhui, coated plain, hot-dip galvanized or PTFE, and shipped with the documents your inspector asks for.
What buyers order
Each product page has the size table, the RFQ fields and a quote link per size.
Continuous-thread studs for ASME B16.5 and B16.47 flanges, supplied as sets of one stud and two heavy hex nuts.
Unequal-thread studs for valve bonnets, pump casings and tapped equipment bodies.
Full-length B7 rod for cutting to size locally, with matching 2H nuts quoted on the same order.
Double-end studs in stainless grades for corrosive or hygienic services.
Special lengths, threads, markings or geometry made to your drawing or sample.
RFQ checklist
Most quotation delays come from a missing thread series, nut count or coating color. Send these and we can quote in one pass.
| Field | What to send |
|---|---|
| Grade | A193 B7 stud, A194 2H nut. State B7M, L7 or another grade if the specification requires it. |
| Diameter and thread | Inch sizes are usually UNC up to 1" and 8UN from 1-1/8". State metric threads if used. |
| Length | Effective length to the ASME B16.5 / B16.47 stud table, or your own length list. Say whether lengths include points. |
| Nuts per stud | Usually two heavy hex nuts per stud. State one nut, no nut or extra nuts if different. |
| Coating | Plain (black oxide or oiled), hot-dip galvanized, or PTFE (fluoropolymer) with the color, e.g. blue. |
| Marking | Grade and manufacturer marking on stud ends and nuts; add any project or heat-number marking. |
| Quantity per line | Pieces or sets per size. MOQ 500 pcs per size; mixed size lists on one order are welcome. |
| Documents | Mill test certificate type, inspection items and any third-party inspection agreed before production. |
Coatings
Lowest cost and shortest lead time. Suits indoor or painted assemblies and stock replacement.
Thick zinc layer for outdoor and coastal plants. Nuts are tapped oversize to fit the galvanized stud.
Low friction for more consistent tightening and easier removal at shutdown. Common colors are blue and green.
Documents
Agree the document list at quotation, so production, inspection and packing are planned around it.
Trade terms
FAQ
Both are chromium-molybdenum alloy steel studs. B7M is tempered to a lower maximum hardness so it can be used where the specification limits hardness for sour (H2S) service. B7M has lower minimum strength than B7, so it must be specified explicitly. Tell us which grade your project calls for.
ASTM A194 Grade 2H heavy hex nuts are the usual pairing. Flange stud bolts are normally supplied with two nuts per stud. If you need a different nut grade or a different count, state it in the RFQ.
Yes. B7 studs and 2H nuts can be quoted PTFE (fluoropolymer) coated, with blue being the most common color. We have shipped PTFE-coated B7 studs with 2H nuts to a petrochemical plant in Malaysia.
We provide the commercial invoice, packing list, certificate of origin and a mill test certificate for the order, plus an inspection report for the items agreed at quotation. Form E is available for ASEAN destinations. Please list any third-party inspection or extra test requirement in the RFQ.
The reference MOQ is 500 pcs per size, and mixed size lists are welcome on one order. Stock items ship in about 10–15 days and production orders in about 25–30 days, confirmed in each quotation.
Guides
Oil, Gas & Petrochemical
Standard and grade, size, length, set contents, coating and quantity per line. MOQ 500 pcs per specification.